Phanteks has unveiled the next chapter in its stunning PC case designs including the brand new Evolv, Eclipse & Enthoo series.
Evolv X2 | $149.99/€149.90 | Early Q4
The X2 has been redefined to fit modern consumer needs. It embodies many features that cater to consumers without their knowledge. Its all-new aluminum interior panels combined with integrated fan positions and rear-connector mainboard support will redefine the future of esthetics.
Display hardware uniquely and impressively.
Glass exterior from all 3 sides which completes the window display for components inside.
Compact footprint to display on desk.
Bringing premium materials and design details to the interior, which was mostly in the exterior with the old Evolv line-up
Integrated hardware (GPU and Mainboard) design for a clean and refined interior.
Components become one with the chassis.
Minimizes cable clutter with integrated cable management.
Supports rear-connector mainboard
Eclipse G400A/G400N | $99.99 / €99.90 & $129.99/€129.90 | Early Q3
The new Eclipse comes with an all-new design to maximize airflow. Doing so allows for an elevated PC experience. From its previous predecessors the P400A, it introduces a brick pattern mesh design for enhanced airflow. It now has a front-air inlet design which is optimized for maximum airflow intake.
G400N: NEXLINQ hub simplifies D-RGB and fan control with a single cable.
G400N: Dual tempered glass with window for sleeved cables.
G400N: Cable comb for better wire management.
The new G400 combines the high airflow performance, known from the Eclipse series, with further refined clean esthetics
The new front inlet is designed to enhance airflow and + at the same time create a clean front presentation.
The new brick pattern front mesh increases high airflow pass-through than before.
Pre-installed with 4x M25 140 G2 fans
3x fan positions + side mesh for direct GPU cooling
Dedicated top radiator + fan support with 60mm clearance
Minimizes cable clutter with the integrated cable management system
Supports latest rear-connector mainboards
NV5 MKII & NV9MKII | $109.99 / €109.90 & $249.99 / €249.90 | Early Q3
With the introduction of rear-connecting mainboards, Phanteks has released their MKII. The MKII will have everything you know and love about the NV5 & NV9 with the addition of compatibility to rear-side connecting mainboards.
Enthoo Pro II – Server Edition XL | $269.99 / €269.90 | Q3
With the previous release of the Enthoo Pro II Server. Phanteks has now released its counterpart Enthoo Pro II Server Edition XL. This chassis design is bigger and better to fit all your server needs. The consumers have asked, and now they will receive. Previously, the Enthoo Pro II Server Edition could fit either ATX or Server Power Supplies. Now, it is designed with dual PSU capabilities. It also comes with a dual chamber design for more flexible cooling. High airflow design with its distinctive brick pattern mesh.
Based on the Elite Chassis design.
Dual chamber configuration leads to more cooling and storage flexibility.
Distinctive brick pattern mesh to allow for high-performance airflow.
Supports 20x 120mm or 15x 140mm fans.
An internal bracket for extra GPU cooling will allow for 3 more 120mm fan slots
8x HDD locations | 10x SSD
10 PCIE Slots
Glacier EZ-Fit | Q3
Glacier EZ-Fit 360 SOFT-KIT | $399.99 / €399.90
Glacier EZ-Fit 360 D30-KIT | $499.99 / €499.90
EZ-Fit 450 CPU | $99.99 / €99.90
EZ-Fit 360RAD-30 | $99.99 / €99.90
EZ-Fit 140 RES-D5 | $249.99 / €249.90
EZ-Fit G40 | $249.99 / €249.90
EZ-Fit 16 HI-PMMA Tubing -Frosted | $18.99 / €18.90 (2x 90cm)
EZ-Fit 16 PVC Tubing – Clear | $12.99 / €12.90 (3m)
Phanteks also addresses consumer water-cooling needs with the new Glacier EZ-Fit line, offering high-performance solutions with the 360 RAD-30 radiator, G40 GPU block, 450 CPU block, and 140 RES-D5 reservoir. These products emphasize ease of installation and superior cooling efficiency.
Key Features:
Full Kit will be sold with D30 fans to include soft tubing and hard tubing with everything you need to start water cooling.
Integrating EZ-Fit push-in fittings into Glacier water blocks/radiator/reservoirs.
Users never have to worry about searching for the perfect fittings for their builds.
Support of both soft and hard tubes.
Clean and modern feel with the integrated flush setting.
Industrial standards to ensure user confidence.
NEXLINQ| Q3
M25 G2 Fans | Single pack 120/140mm $10.99 / €10,90
3-pack 120/140mm $29.99 / €29,90
Glacier One 360M25 G2 AIO | $129.99 / €129.90
NEXLINQ Controller Hub | $29.99 / €29.90
PolarST4 | Target Price $29.99 / €29.90
Phanteks release their very own ecosystem. An ecosystem includes the M25 G2 fans, Glacier One M25 G2 AIO, and a NEXLINQ Hub. With the new LINQ-6 connector, users will be able to provide power for the fan and D-RGB lighting.
M25 G2 Fans:
Daisy chains together and controls PWM and DRGB through a single Link-6 cable.
D-RGB with infinity mirror hub
Screw cover plates
Regular/Reversed
120mm/140mm avail in black and white.
Glacier One M25 G2 AIO
DRGB cap that is designed to match with Phanteks design style
Has an integrated fan in the CPU block to provide additional cooling for motherboard components.
Comes with High airflow M25 G2 fans with D-RGB lighting and an infinity mirror hub
Daisy-chain with other Nexlinq products and control through a single Linq6 cable
Maximum clearance with motherboard and RAM components
NEXLINQ Hub
$29.99 / €29.90 Available: Q3
Supports compatible Nexlinq products
Provide fan and D-RGB lighting control
Backward compatible through the legacy ports
Supports Window Dynamic lighting and third-party MB input
Single Linq6 cable to the motherboard for clean cable management
PolarST4
120M25 G2 Fan
Fits any mainboard without RAM Issues
Cost-effective + Sleek Design
Top DRGB Cover
T30-140(Prototype)| N/A 140mm N/A
Uncompromising Quality: High-quality 3-phase motor DUAL VAPO bearing, Blades, and frame made from glass fiber reinforced with LCP (Liquid-Crystal Polymer), Magnetic levitation technology, increased fan thickness, 0.5mm blade tip clearance.
One Fan all Scenarios: Software-free fan profile, hybrid mode for ultimate silence, performance mode for high cooling, advanced mode for industrial-grade cooling.
Ultimate Performance: The design focused on maximizing cooling and noise performance. Aerodynamically optimized for radiators, heatsinks, and dust filters rubber dampeners.
Intuitive Installation: Daisy-Chain Cable Design, PWM extension cable, Radiator, and Halos screw included.
